Pairing ID (hex)	Pairing ID (dec)	Name	Description	Comment
0x0001	1	AL_SWITCH_ON_OFF	Switch On/Off	Binary Switch value
0x0002	2	AL_TIMED_START_STOP	Timed Start/Stop	For staircase lighting or movement detection
0x0003	3	AL_FORCED	Force-position	Forces value dependent high priority on or off state
0x0004	4	AL_SCENE_CONTROL	Scene Control	Recall or learn the set value related to encoded scene number
0x0006	6	AL_TIMED_MOVEMENT	Movement under consideration of brightness	Activation of an autonomous switch off function triggered by an movement detector
0x0007	7	AL_TIMED_PRESENCE	Presence	Announces presence triggered by an movement detector to be used by e.g. RTCs. Is independent of brightness and can be used for alerts e.g.
0x0010	16	AL_RELATIVE_SET_VALUE_CONTROL	Relative Set Value	Relative dimming value
0x0011	17	AL_ABSOLUTE_SET_VALUE_CONTROL	Absolute Set Value	Absolute control of the set value
0x0012	18	AL_NIGHT	Night	Toggle between day and night where day = 0 and night = 1
0x0013	19	AL_RESET_ERROR	invalid string id	Resets load failures / short circuits / etc
0x0015	21	AL_RGB	RGB color	RGB Color coded in three bytes
0x0016	22	AL_COLOR_TEMPERATURE	Color Temperature	Color temperature
0x0017	23	AL_HSV	HSV	Hue (2 Byte) / Saturation (1 Byte) / Value (1 Byte / brightness)
0x0018	24	AL_COLOR	HUE	Hue (2 Byte)
0x0019	25	AL_SATURATION	Saturation	Saturation (1 Byte)
0x001A	26	AL_ABSOLUTE_SET_VALUE_CONTROL_HUE	Absolute Set Value	Absolute control of the set value (does not switch on the light)
0x0020	32	AL_MOVE_UP_DOWN	Move Up/Down	Moves sunblind up (0) and down (1)
0x0021	33	AL_STOP_STEP_UP_DOWN	Adjust Up/Down	Stops the sunblind and to step it up/down
0x0023	35	AL_SET_ABSOLUTE_POSITION_BLINDS_PERCENTAGE	Set Absolute Position Blinds	Moves the sunblinds into a specified position
0x0024	36	AL_SET_ABSOLUTE_POSITION_SLATS_PERCENTAGE	Set Absolute Position Slats	Moves the slats into a specified position
0x0025	37	AL_WIND_ALARM	Wind Alarm	State of the wind sensor (sent cyclically and on COV) Moves the sunblind to a secure position and to block it for any further control
0x0026	38	AL_FROST_ALARM	Frost Alarm	State of the frost sensor (sent cyclically and on COV) Moves the sunblind to a secure position and to block it for any further control
0x0027	39	AL_RAIN_ALARM	Rain Alarm	State of the rain sensor (sent cyclically and on COV)
0x0028	40	AL_FORCED_UP_DOWN	Force-position blind	Forces value dependent high priority up or down state
0x0029	41	AL_WINDOW_DOOR_POSITION	Window/Door position	Delivers position for Window/Door (Open / Tilted / Closed)
0x0030	48	AL_ACTUATING_VALUE_HEATING	Actuating Value Heating	Determines the through flow volume of the control valve
0x0031	49	AL_FAN_COIL_LEVEL	Fan Level Heating	Display value of the fan coil speed. (0=off / 1=lowest - 5=fastest)
0x0032	50	AL_ACTUATING_VALUE_COOLING	Actuating Value Cooling	Determines the through flow volume of the control valve
0x0033	51	AL_SET_POINT_TEMPERATURE	Set Value Temperature	Defines the displayed set point temperature of the system
0x0034	52	AL_RELATIVE_SET_POINT_TEMPERATURE	Relative Set Point Temperature	Defines the relative set point temperature of the system
0x0035	53	AL_WINDOW_DOOR	Window/Door	Open = 1 / closed = 0
0x0036	54	AL_STATE_INDICATION	Status indication	states: on/off heating/cooling; eco/comfort; frost/not frost
0x0037	55	AL_FAN_MANUAL_ON_OFF	Fan Manual Heating On/Off	Switches Fan in manual control mode (master to slave)
0x0038	56	AL_CONTROLLER_ON_OFF	Controller On/Off	Switches controller on or off. Off means protection mode
0x0039	57	AL_RELATIVE_SET_POINT_REQUEST	Relative Set Point Request	Request for a new relative set point value
0x003A	58	AL_ECO_ON_OFF	Eco mode On/Off Request	Switches eco mode on or off
0x003B	59	AL_COMFORT_TEMPERATURE	Comfort Temperature	Sends the current comfort temperature
0x003C	60	AL_ABSOLUTE_SET_VALUE_CONTROL_WHITE	Brightness white	Absolute control of the white set value
0x0040	64	AL_FAN_STAGE_REQUEST	Fan Level Request	Request for a new manual fan stage
0x0041	65	AL_FAN_MANUAL_ON_OFF_REQUEST	Fan Manual On/Off Request	Request for switching fan in manual/auto mode
0x0042	66	AL_CONTROLLER_ON_OFF_REQUEST	Controller On/Off Request	Request for switching controller on or off. Off means protection mode
0x0044	68	AL_ECO_ON_OFF_INDICATION	Eco mode On/Off Request	Indicates ECO mode
0x0100	256	AL_INFO_ON_OFF	Info On/Off	Reflects the binary state of the actuator
0x0101	257	AL_INFO_FORCE	Force-position info	Indicates the cause of forced operation (0 = not forced)
0x0105	261	AL_SYSAP_INFO_ON_OFF	SysAP-InfoOnOff	Reflects the binary state of the actuator group
0x0106	262	AL_SYSAP_INFO_FORCE	SysAP-InfoForce	Indicates whether the actuator group is forced (1) or not forced (0)
0x0110	272	AL_INFO_ACTUAL_DIMMING_VALUE	Info Actual Dimming Value	Reflects the actual value of the actuator
0x0111	273	AL_INFO_ERROR	Info Error	Indicates load failures / short circuits / etc
0x0115	277	AL_SYSAP_INFO_ACTUAL_DIMMING_VALUE	SysAP-InfoCurrentDimmingValue	Reflects the actual value of the actuator group
0x0116	278	AL_SYSAP_INFO_ERROR	SysAP-InfoError	Indicates load failures / short circuits / etc
0x0117	279	AL_INFO_RGB	Info RGB color	RGB Color coded in three bytes
0x0118	280	AL_INFO_COLOR_TEMPERATURE	Info Color Temperature	Color temperature
0x011A	282	AL_SYSAP_INFO_COLOR_TEMPERATURE	SysAP-Info Color Temperature	Color temperature
0x011B	283	AL_INFO_HSV	Info HSV	Hue (2 Byte) Saturation (1 Byte); Value (1 Byte - brightness)
0x011C	284	AL_SYSAP_INFO_HSV	SysAP Info HSV	Hue (2 Byte) Saturation (1 Byte); Value (1 Byte - brightness)
0x011D	285	AL_INFO_COLOR_MODE	Info Color Mode	hsv or ct
0x011E	286	AL_SYSAP_INFO_COLOR_MODE	SysAP Info Color Mode	hsv or ct
0x0120	288	AL_INFO_MOVE_UP_DOWN	Info Move Up/Down	Indicates last moving direction and whether moving currently or not
0x0121	289	AL_CURRENT_ABSOLUTE_POSITION_BLINDS_PERCENTAGE	Current Absolute Position Blinds Percentage	Indicate the current position of the sunblinds in percentage
0x0122	290	AL_CURRENT_ABSOLUTE_POSITION_SLATS_PERCENTAGE	Current Absolute Position Slats Percentage	Indicate the current position of the slats in percentage
0x0125	293	AL_SYSAP_INFO_MOVE_UP_DOWN	SysAP-InfoMoveUpDown	Indicates last moving direction and whether moving currently or not of the actuator group
0x0126	294	AL_SYSAP_CURRENT_ABSOLUTE_POSITION_BLINDS_PERCENTAGE	SysAP-InfoCurrentAbsoluteBlindsPercentage	indicate the current position of the sunblinds in percentage of the actuator group
0x0127	295	AL_SYSAP_CURRENT_ABSOLUTE_POSITION_SLATS_PERCENTAGE	SysAP-InfoCurrentAbsoluteSlatsPercentage	indicate the current position of the slats in percentage of the actuator group
0x0130	304	AL_MEASURED_TEMPERATURE	Measured Temperature	Indicates the actual measured temperature
0x0131	305	AL_INFO_VALUE_HEATING	Info Value Heating	States the current flow volume of the conrol valve
0x0132	306	AL_INFO_VALUE_COOLING	Info value cooling	States the current flow volume of the conrol valve
0x0135	309	AL_HEATING_COOLING	Switchover heating/cooling	switch between heating and cooling: heating = 0 / cooling = 1
0x0136	310	AL_ACTUATING_FAN_STAGE_HEATING	Actuating Fan Stage Heating	Requests a new manual fan stage from actuator in heating mode
0x0140	320	AL_INFO_ABSOLUTE_SET_POINT_REQUEST	Absolute setpoint temperature	Absolute set point temperature input for timer
0x0141	321	AL_INFO_ACTUATING_VALUE_ADD_HEATING	Additional heating value info	Feedback
0x0142	322	AL_INFO_ACTUATING_VALUE_ADD_COOLING	Additional cooling value info	Feedback
0x0143	323	AL_ACTUATING_VALUE_ADD_HEATING	Control value additional heating
0x0144	324	AL_ACTUATING_VALUE_ADD_COOLING	Control value additional cooling
0x0145	325	AL_INFO_FAN_ACTUATING_STAGE_HEATING	Info Actuating Fan Stage Heating	Feedback from FCA
0x0146	326	AL_INFO_FAN_MANUAL_ON_OFF_HEATING	Info Actuating Fan Manual On/Off Heating	Feedback from FCA
0x0147	327	AL_ACTUATING_FAN_STAGE_COOLING	Actuating Fan Stage Cooling	Requests a new manual fan stage from actuator in cooling mode
0x0149	329	AL_INFO_FAN_ACTUATING_STAGE_COOLING	Info Fan Stage Cooling	Feedback for current fan stage in cooling mode
0x014A	330	AL_INFO_FAN_MANUAL_ON_OFF_COOLING	Info Fan Manual On/Off Cooling	Feedback for manual fan control cooling mode
0x014B	331	AL_HEATING_ACTIVE	Heating active
0x014C	332	AL_COOLING_ACTIVE	Cooling active
0x014D	333	AL_HEATING_DEMAND	Heating demand
0x014E	334	AL_COOLING_DEMAND	Cooling demand
0x014F	335	AL_INFO_HEATING_DEMAND	Heating demand feedback signal
0x0150	336	AL_INFO_COOLING_DEMAND	Cooling demand feedback signal
0x0151	337	AL_HUMIDITY	Humidity	Measured Humidity
0x0152	338	AL_AUX_ON_OFF_REQUEST	Aux On/Off request	Aux On/Off request
0x0153	339	AL_AUX_ON_OFF_RESPONSE	Aux On/Off response	Aux On/Off response
0x0154	340	AL_HEATING_ON_OFF_REQUEST	Heating On/Off request	Heating On/Off request
0x0155	341	AL_COOLING_ON_OFF_REQUEST	Cooling On/Off request	Cooling On/Off request
0x0156	342	AL_INFO_OPERATION_MODE	Operation mode
0x0157	343	AL_INFO_SWING_MODE	Swing H/V
0x0158	344	AL_SUPPORTED_FEATURES	Supported features
0x0159	345	AL_EXTENDED_STATUS	Extended Status Indication
0x015A	346	AL_EXTENDED_STATUS_US	Extended Status Indication
0x015B	347	AL_AUX_HEATING_ON_OFF_REQUEST	Aux Heating On Off Request
0x015C	348	AL_EMERGENCY_HEATING_ON_OFF_REQUEST	Emergency Heating On Off Request
0x0160	352	AL_RELATIVE_FAN_SPEED_CONTROL	Relative fan speed control	Relative control of the set value
0x0161	353	AL_ABSOLUTE_FAN_SPEED_CONTROL	Absolute fan speed control	Absolute control of the set value
0x0162	354	AL_INFO_ABSOLUTE_FAN_SPEED	Info absolute fan speed	Reflects the actual value of the actuator
0x0163	355	AL_SYSAP_INFO_ABSOLUTE_FAN_SPEED	SysAP-InfoActualFanSpeed	Reflects the actual value of the actuator
0x0164	356	AL_TIMED_MOVEMENT_REQUEST	Movement under consideration of brightness	Activation of an autonomous switch off function triggered by an movement detector
0x0165	357	AL_INFO_TIMED_MOVEMENT	SysAP-InfoActualFanSpeed	Reflects the actual value of the actuator
0x0166	358	AL_MOVEMENT_DETECTOR_STATUS	SysAP-InfoActualFanSpeed	Reflects the actual value of the actuator
0x0167	359	AL_LOCK_SENSOR	Movement under consideration of brightness	Activation of an autonomous switch off function triggered by an movement detector
0x0168	360	AL_INFO_LOCKED_SENSOR	SysAP-InfoActualFanSpeed	Reflects the actual value of the actuator
0x0170	368	AL_INFO_VALUE_WHITE	Info Brightness white	Feedback value white
0x0171	369	AL_SYSAP_INFO_VALUE_WHITE	SysAP-Info Brightness white	SysAP Feedback value white
0x01A0	416	AL_NOTIFICATION_FLAGS	Notification flags	Notifications of RF devices (e. g. Battery low)
0x01A1	417	AL_INFO_LOCAL_TIMER_CONTROL_8	Timer control	local timer control for 8 timers
0x01A2	418	AL_INFO_GROUP_TIMER_CONTROL_8	Timer control	group timer control for 8 timers
0x0280	640	AL_BOOL_VALUE_1	Power RC	Bool Value 1
0x0281	641	AL_BOOL_VALUE_2	Power RH	Bool Value 2
0x0282	642	AL_BOOL_VALUE_3	Proximity status	Bool Value 3
0x0290	656	AL_SCALING_VALUE_1	Brightness sensor	Scaling Value 1
0x0291	657	AL_SCALING_VALUE_2	Last touch	Scaling Value 2
0x0292	658	AL_SCALING_VALUE_3	LED backlighting night mode	Scaling Value 3
0x02C0	704	AL_LOCATOR_BEEP	Locator beep	Locator Beep
0x02C1	705	AL_SWITCH_TEST_ALARM	Switch test alarm	Switch Test Alarm
0x02C2	706	AL_TEST_ALARM_ACTIVE	Test alarm active	Test-Alarm Active
0x02C3	707	AL_FIRE_ALARM_ACTIVE	Fire alarm active	Fire-Alarm Active
0x02C4	708	AL_CO_ALARM_ACTIVE	CO alarm active	CO-Alarm Active
0x02C5	709	AL_REMOTE_LOCATE	Silence alarms	Remote locate
0x02C6	710	AL_DETECTOR_PAIRING_MODE	Detector pairing mode	Detector pairing mode
0x02C7	711	AL_INFO_DETECTOR_PAIRING_MODE	Detector pairing mode active	Info detector pairing mode
0x0400	1024	AL_OUTDOOR_TEMPERATURE	Outside temperature	Outdoor Temperature
0x0401	1025	AL_WIND_FORCE	Wind force	Wind force
0x0402	1026	AL_BRIGHTNESS_ALARM	Brightness alarm	Brightness alarm
0x0403	1027	AL_BRIGHTNESS_LEVEL	Lux value	Weatherstation brightness level
0x0404	1028	AL_WIND_SPEED	Wind speed	Wind speed
0x0405	1029	AL_RAIN_SENSOR_ACTIVATION_PERCENTAGE	Rain detection
0x0406	1030	AL_RAIN_SENSOR_FREQUENCY	Rain sensor frequency
0x0440	1088	AL_MEDIA_PLAY	Play	Start playing
0x0441	1089	AL_MEDIA_PAUSE	Pause	Pause/Stop playing
0x0442	1090	AL_MEDIA_NEXT	Next	Play next title
0x0443	1091	AL_MEDIA_PREVIOUS	Previous	Play previous title
0x0444	1092	AL_MEDIA_PLAY_MODE	Play mode	Play mode (shuffle / repeat)
0x0445	1093	AL_MEDIA_MUTE	Mute	Mute (1) and unmute (0) a player
0x0446	1094	AL_RELATIVE_VOLUME_CONTROL	Relative volume control	Relative volume control. See also relative dimming
0x0447	1095	AL_ABSOLUTE_VOLUME_CONTROL	Absolute volume control	Set player volume
0x0448	1096	AL_GROUP_MEMBERSHIP	Group membership
0x0449	1097	AL_PLAY_FAVORITE	Play favorite
0x044A	1098	AL_PLAY_NEXT_FAVORITE	Play next favorite
0x0460	1120	AL_PLAYBACK_STATUS	Playback status
0x0461	1121	AL_INFO_MEDIA_CURRENT_ITEM_METADATA	Current item metadata info
0x0462	1122	AL_INFO_MUTE	Info mute
0x0463	1123	AL_INFO_ACTUAL_VOLUME	Info actual volume
0x0464	1124	AL_ALLOWED_PLAYBACK_ACTIONS	Allowed playback actions
0x0465	1125	AL_INFO_GROUP_MEMBERSHIP	Info group membership
0x0466	1126	AL_INFO_PLAYING_FAVORITE	Info playing favorite
0x0467	1127	AL_ABSOLUTE_GROUP_VOLUME_CONTROL	Absolute Group Volume Control
0x0468	1128	AL_INFO_ABSOLUTE_GROUP_VOLUME	Info Absolute Group Volume
0x0469	1129	AL_INFO_CURRENT_MEDIA_SOURCE	Media source
0x04A0	1184	AL_SOLAR_POWER_PRODUCTION	Solar power production	Power from the sun
0x04A1	1185	AL_INVERTER_OUTPUT_POWER	Inverter output power	Output power of inverter (pbatt+Psun)
0x04A2	1186	AL_SOLAR_ENERGY_TODAY	Solar energy (today)	Produced Energy
0x04A3	1187	AL_INJECTED_ENERGY_TODAY	Injected energy (today)	Energy into the grid
0x04A4	1188	AL_PURCHASED_ENERGY_TODAY	Purchased energy (today)	Energy from the grid
0x04A5	1189	AL_NOTIFICATION_RUN_STANDALONE	Inverter alarm	Inverter is working in stand alone mode
0x04A6	1190	AL_SELF_CONSUMPTION	Self-consumption	production PV/ Total consumption
0x04A7	1191	AL_SELF_SUFFICIENCY	Self-sufficiency	Consumption from PV/ Total consumption
0x04A8	1192	AL_HOME_POWER_CONSUMPTION	Home power consumption	Power in home (PV and grid)
0x04A9	1193	AL_POWER_TO_GRID	Power to grid	Power from and to the grid: Purchased (less than 0), Injection (more than 0)
0x04AA	1194	AL_CONSUMED_ENERGY_TODAY	Consumed energy (today)	Energy bought from grid per day
0x04AB	1195	AL_NOTIFICATION_METER_COMMUNICATION_ERROR_WARNING	Meter alarm	Meter communication loss
0x04AC	1196	AL_SOC	Battery level	Battery level
0x04AD	1197	AL_BATTERY_POWER	Battery power	Batter power: Discharge (less then 0), Charge (more then 0)
0x04B0	1200	AL_BOOST_ENABLE_REQUEST	Boost	1: Boost enable request, 0: boost disable request
0x04B1	1201	AL_STOP_CHARGING_SESSIONS_REQUEST	Stop charging reuqest	1: Stop charging session requested, 0: n/a so far, will be resetted when cable is unplugged
0x04B2	1202	AL_STOP_ENABLE_CHARGING_REQUEST	Enable charging reuqest	1: Enable charging when cable is plugged in, 0: Disable next charging session but charge until cable is plugged
0x04B3	1203	AL_INFO_BOOST	Info boost	1: Boost enabled, 0: boost disabled
0x04B4	1204	AL_INFO_WALLBOX_STATUS	Info wallbox status	Wallbox status 00000001: car plugged in, 00000002: Authorization granted, 00000004: Not charging, battery fully loaded, 40000000: charging stopped due to blackout prevention, 80000000: Ground fault error
0x04B5	1205	AL_INFO_CHARGING	Info charging	1: Charging, 0: Not charging
0x04B6	1206	AL_INFO_CHARGING_ENABLED	Info charging enabled	1: Charging enabled for next session, 0: Charging disabled for next session
0x04B7	1207	AL_INFO_INSTALLED_POWER	Info installed power	Installed power (e.g. 20 kW)
0x04B8	1208	AL_INFO_ENERGY_TRANSMITTED	Info transmitted energy	Energy transmitted so far per session (in Wh)
0x04B9	1209	AL_INFO_CAR_RANGE	Info car range	Car range in km per sessions
0x04BA	1210	AL_INFO_START_OF_CHARGING_SESSION	Info charging duration	Start of charging session (in minutes in UTC)
0x04BB	1211	AL_INFO_LIMIT_FOR_CHARGER	Info current limit	Limit for charger (in kW)
0x04BC	1212	AL_INFO_LIMIT_FOR_CHARGER_GROUP	Info current limit for group	Limit for group of charger (in kW)
0x04BD	1213	AL_INFO_ALBUM_COVER_URL	Album cover URL	Album cover URL
0x04BE	1214	AL_INFO_CURRENT_SOLAR_POWER	Solar power production	Current Solar power
0x04BF	1215	AL_INFO_CURRENT_INVERTER_OUTPUT_POWER	Inverter output power	Output power of inverter (pbatt+Psun)
0x04C0	1216	AL_INFO_CURRENT_HOME_POWER_CONSUMPTION	Home power consumption	Power in home (PV and grid)
0x04C1	1217	AL_INFO_CURRENT_POWER_TO_GRID	Power to grid	Power from and to the grid: Purchased (less than 0), Injection (more than 0)
0x04C2	1218	AL_INFO_CURRENT_BATTERY_POWER	Battery power	Batter power: Discharge (less then 0), Charge (more then 0)
0x04C3	1219	AL_INFO_TOTAL_ENERGY_FROM_GRID	Total energy from grid	Total energy from grid
0x04C4	1220	AL_INFO_TOTAL_ENERGY_TO_GRID	Total energy to grid	Total energy to grid
0x0501	1281	AL_DISARM_SYSTEM	secure@home Central Unit	Encrypted control datapoint for domus alarm center
0x0502	1282	AL_DISARM_COUNTER	DomusDisarmCounter	Info about the next counter to disarm the system
0x0504	1284	AL_INFO_INTRUSION_ALARM	Intrusion Alarm	Intrusion Alarm
0x0505	1285	AL_INFO_SAFETY_ALARM	Safety Alarm	Safety Alarm
0x0507	1287	AL_INFO_ERROR_STATUS	InfoConfigurationStatus	Domus alarm device negative feedback and configuration info.
0x0508	1288	AL_ENABLE_CONFIGURATION	Enable configuration	Encrypted control datapoint for entering configuration mode
0x0509	1289	AL_DOMUS_ZONE_CONTROL	Disarming LED	Arm/Disarm a Zone
0x050A	1290	AL_DOMUS_KEY_INFO	AES Key	Manufacturer ID + Serial + AES Key
0x050B	1291	AL_ZONE_STATUS	Zone status	Zone status
0x050D	1293	AL_INFO_CONFIGURATION_STATUS	InfoConfigurationStatus	Indicates configuration status and timewindow
0x050E	1294	AL_DOMUS_DISARM_DELAY_TIME	Time	Absolute number of seconds when the zone will be armed
0x05D8	1496	AL_DOMUS_SIGNAL_STRENGTH	invalid string id	2 Bit per Channel
0x0600	1536	AL_START_STOP	Start / Stop	Starts / Stops operation
0x0601	1537	AL_PAUSE_RESUME	Pause / Resume
0x0602	1538	AL_SELECT_PROGRAM	Select program
0x0603	1539	AL_DELAYED_START_TIME	Delayed start time
0x0604	1540	AL_INFO_STATUS	Info status
0x0605	1541	AL_INFO_REMOTE_START_ENABLED	Info remote start enabled
0x0606	1542	AL_INFO_PROGRAM	Info program
0x0607	1543	AL_INFO_FINISH_TIME	Info finish time
0x0608	1544	AL_INFO_DELAYED_START_TIME	Info delayed start
0x0609	1545	AL_INFO_DOOR	Info door
0x060A	1546	AL_INFO_DOOR_ALARM	Info door alarm
0x060B	1547	AL_SWITCH_SUPERCOOL	Switch supercool
0x060C	1548	AL_SWITCH_SUPERFREEZE	Switch superfreeze
0x060D	1549	AL_INFO_SWITCH_SUPERCOOL	Info switch supercool
0x060E	1550	AL_INFO_SWITCH_SUPERFREEZE	Info switch superfreeze
0x060F	1551	AL_CURRENT_TEMPERATURE_APPLIANCE_1	Measured Temperature
0x0610	1552	AL_CURRENT_TEMPERATURE_APPLIANCE_2	Measured Temperature
0x0611	1553	AL_SETPOINT_TEMPERATURE_APPLIANCE_1	Set Value Temperature
0x0612	1554	AL_SETPOINT_TEMPERATURE_APPLIANCE_2	Set Value Temperature
0x0613	1555	AL_CHANGE_OPERATION	Change operation
0x0614	1556	AL_INFO_VERBOSE_STATUS	Detailed status info
0x0615	1557	AL_INFO_REMAINING_TIME	Info remaining time	Remaining time till status change (start, finish, etc.)
0x0616	1558	AL_INFO_STATUS_CHANGED_TIME	Time of last status change (start, finish, etc.)	Time of last status change (start, finish, etc.)
0x0618	1560	AL_LOCK_UNLOCK_COMMAND	Lock/Unlock door command	Lock/Unlock door command (1 Bit)
0x0619	1561	AL_INFO_LOCK_UNLOCK_COMMAND	Info Locked / Unlocked	Info Lock/Unlock door(1 Bit)
0x061A	1562	AL_INFO_PRESSURE	Air pressure	Measured air pressure
0x061C	1564	AL_INFO_CO	CO value	Carbon monoxide level
0x061D	1565	AL_INFO_NO_2	NO2 value	Nitrogen dioxide level
0x061E	1566	AL_INFO_O_3	O3 value	Ozone level
0x061F	1567	AL_INFO_PM_10	PM10 value	PM10 level
0x0620	1568	AL_INFO_PM_2_5	PM2.5 value	PM2.5 level
0xF001	61441	AL_TIME_OF_DAY	Time	Current local time
0xF002	61442	AL_DATE	Date	Curent local date
0xF003	61443	AL_MESSAGE_CENTER_NOTIFICATION	Notification	Notification from message center
0xF101	61697	AL_SWITCH_ENTITY_ON_OFF	Switch entity On/Off	Entity control e.g. activate an alert or timer program
0xF102	61698	AL_INFO_SWITCH_ENTITY_ON_OFF	Info switch entity On/Off	Reflects the active state of an entity e.g. alert or timer program
0xF104	61700	AL_CONSISTENCY_TAG	Consistency Tag	Notifications of RF devices (e. g. Battery low)
0xF105	61701	AL_BATTERY_STATUS	Battery Status	Notifications of RF devices (e. g. Battery low)
0xF106	61702	AL_STAY_AWAKE	Stay awake!	Notifications of RF devices (e. g. Battery low)
0xF107	61703	AL_PROXY_1_TO_6_BIT	Proxy switch
0xF108	61704	AL_PROXY_1_BYTE	Proxy, 1 byte
0xF109	61705	AL_PROXY_2_BYTE	Proxy, 2 byte
0xF10A	61706	AL_PROXY_4_BYTE	Proxy, 4 byte
0xF10B	61707	AL_CYCLIC_SLEEP_TIME	Cyclic sleep time	Time of sleep cycles
0xF10C	61708	AL_SYSAP_PRESENCE	Presence	SysAP presence
0xF10D	61709	AL_SYSAP_TEMPERATURE	Measured temperature 1	SysAP temperature
0xF10E	61710	AL_STANDBY_STATISTICS	Standby Statistics	Statistics about standby usage for battery devices
0xF10F	61711	AL_HEARTBEAT_DELAY	Heartbeat delay	Time period between two heartbeats
0xF110	61712	AL_INFO_HEARTBEAT_DELAY	Info heartbeat delay	Time period between two heartbeats
0xFF01	65281	AL_MEASURED_TEMPERATURE_1	Measured temperature 1	For debug purposes
0xFF02	65282	AL_MEASURED_TEMPERATURE_2	Measured temperature 2	For debug purposes
0xFF03	65283	AL_MEASURED_TEMPERATURE_3	Measured temperature 3	For debug purposes
0xFF04	65284	AL_MEASURED_TEMPERATURE_4	Measured temperature 4	For debug purposes